Delay in ms for 3D printers and seconds for GRBL. It is used to heat up the material and initiate the burning process.
Power On Delay: This will turn on the laser and wait to move until the delay is complete. If you don’t have PWM, keep at max power (either 255 or 12000). For GRBL 0.9 and 1 standard, use a number between 0 (12000 being full power). For J Tech firmware and most 3D printers use a number between 0 and 255 (255 being full power). Laser Power: If you have PWM control, then you can adjust this. Laser Speed: The speed of the machine when the laser is ON in mm/min. Travel Speed: The speed of the machine when the laser is OFF in mm/min. Laser OFF Command: The command for turning OFF the laser. Laser ON Command: The command for turning ON the laser. Once it is there it will show up under the “extensions” tab in inkscape. zip folder into the “inkscape\share\extensions” folder. This plug-in will convert a path object in inkscape into a G Code file for use in your laser upgraded machine. The new plug-in allows for multiple commands for laser on and off for all the different versions of printers as well as the ability for multiple passes for cutting.
0 kommentar(er)
